H3C MSR810 Command Reference Manual page 259

Field
Current Service Status
Current Roaming Status
Network Selection Mode
Current Network Connection
Downstream Bandwidth
Radio Information
Current RSSI (1xRTT)
Current RSSI (EVDO)
Current Voltage
PIN Verification
PIN Status
Number of Retries remaining
UIM Status
# Display the call connection information for Cellular 0/0 (LTE network).
Description
Service status of the modem:
• Service available—The modem is providing services
correctly.
• Emergency—The modem is providing limited services.
The cellular interface is not available.
• No service—The modem cannot provide services. The
cellular interface is not available.
• Low power—The modem is in low power mode. The
cellular interface is not available.
Roaming status:
• Roaming.
• Home.
Network selection mode
• Manual.
• Automatic.
Current network:
• No Service.
• 1xRTT/EVDO HYBRID.
• EVDO.
• 1xRTT.
• Unknown.
Downstream bandwidth, in bps.
Radio communication information.
Current RSSI of 1xRTT:
• An RSSI value in the range of –125 dBm to –75 dBm.
• Unknown—No signal.
Current RSSI of EVDO:
• An RSSI value in the ranges of –120 dBm to –60 dBm.
• Unknown—No signal.
Current voltage of the UIM card, in mV.
PIN authentication status:
• Disabled.
• Enabled.
PIN status:
• Ready—The UIM card is ready.
• PIN Requirement—Requires you to execute the pin
verify command to enter the PIN for PIN verification.
• PUK Requirement—Requires you to execute the pin
unlock command to unlock the SIM or UIM card.
Remaining retries available for entering the PIN or PUK.
UIM card status:
• OK—The UIM card is normal.
• Network Reject—The UIM card is denied access to the
network. The cellular interface is not available.
• Not Insert—The UIM card is absent. The cellular
interface is not available.
247