H3C MSR810 Command Reference Manual page 158

Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface
HDLC-B2
Table 24 Command output
Field
Current state
Line protocol state
Description
Bandwidth
Maximum Transmit Unit
Hold timer
Retry times
Internet Address is 1.1.1.2/24
Primary
Link layer protocol
Physical
Baudrate
Output queue - Urgent queuing:
Size/Length/Discards 0/100/0
Output queue - Protocol queuing:
Size/Length/Discards 0/500/0
Output queue - FIFO queuing:
Size/Length/Discards 0/75/0
Last clearing of counters
Link Cause
ADM Administratively
Description
Physical state and administrative state of the HDLC link bundle
interface:
• DOWN (Administratively)—The interface is shut down by using
the shutdown command (the interface is administratively down).
• DOWN—The interface is administratively up but physically down.
• UP—The interface is up both administratively and physically.
Link layer protocol state of the HDLC link bundle interface:
• DOWN—The link layer protocol of the interface is down, typically
because the HDLC link bundle interface does not have any
Selected interface.
• UP—The link layer protocol of the interface is up.
Description of the HDLC link bundle interface.
Expected bandwidth of the HDLC link bundle interface.
MTU on the HDLC link bundle interface.
Keepalive transmission interval of the interface.
This field is ineffective for an HDLC link bundle interface because an
HDLC link bundle interface does not transmit keepalives.
Keepalive retry limit.
This field is ineffective for an HDLC link bundle interface because an
HDLC link bundle interface does not transmit keepalives.
IP address of the HDLC link bundle interface.
If no IP address is configured for the interface, this field is replaced
with Internet protocol processing: disabled.
Link layer protocol encapsulation on the HDLC link bundle interface.
Physical type of the HDLC link bundle interface.
Baudrate of the HDLC link bundle interface.
Traffic statistics for each output queue on the HDLC link bundle
interface, including:
• The number of packets in the queue (the queue size).
• The maximum number of packets that the queue can hold (queue
length).
• The number of dropped packets.
The output queues on the HDLC link bundle interface include the
following types:
• Urgent queue.
• Protocol queue.
• FIFO queue.
Time when the reset counters interface command was last used to
clear the interface statistics. This field displays Never if the reset
counters interface command has never been used on the interface
since device startup.
146