Pppoe-Server Session-Limit - H3C MSR810 Command Reference Manual

Hardware
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR 3610
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3620/3620-DP/3640/3660
MSR5620/5660/5680
Usage guidelines
A PPPoE server-enabled interface can be bound to a nonexistent VT interface.
If the interface has been bound to a VT interface, you cannot use this command to bind the interface
to another VT interface. To do that, disable the PPPoE server on the interface first.
If both the PPPoE client and PPPoE server are enabled on an interface, the PPPoE client feature
does not take effect.
Examples
# Enable the PPPoE server on GigabitEthernet 1/0/1 and bind the interface to Virtual-Template 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] pppoe-server bind virtual-template 1

pppoe-server session-limit

Use pppoe-server session-limit to set the maximum number of PPPoE sessions on an interface.
Use undo pppoe-server session-limit to restore the default.
Syntax
pppoe-server session-limit number
undo pppoe-server session-limit
Default
The number of PPPoE sessions on an interface is not limited.
Views
Layer 3 Ethernet interface/subinterface view
Layer 3 virtual Ethernet interface/subinterface view
VLAN interface view
Layer 3 aggregate interface/subinterface view
VE-L3VPN interface/subinterface view
EFM interface/subinterface view
Predefined user roles
network-admin
Parameters
number: Specifies the maximum number of PPPoE sessions on an interface, in the range of 1 to
65534.
81
Value range
0 to 1023
0 to 1023
0 to 1023
0 to 2047
0 to 2047
0 to 4095