H3C MSR810 Command Reference Manual page 157

Msr router series comware 7 layer 2 - wan access
Hide thumbs Also See for MSR810:
Table of Contents

Advertisement

Predefined user roles
network-admin
network-operator
Parameters
bundle-id: Specifies an HDLC link bundle interface by its number.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the
command displays only the first 27 characters of each interface description.
down: Displays information about interfaces in DOWN state and the link down causes. If you do not
specify this keyword, the command displays information about interfaces in all states.
Usage guidelines
If you do no t specify the hdlc-bundle keyword, this command displays information about all
interfaces.
If you specify the hdlc-bundle keyword without any HDLC link bundle interface number, this
command displays information about all HDLC link bundle interfaces.
Examples
# Display detailed information about HDLC link bundle interface 1.
<Sysname> display interface hdlc-bundle 1
HDLC-bundle1
Current state: UP
Line protocol state: UP
Description: HDLC-bundle1 Interface
Bandwidth: 128kbps
Maximum Transmit Unit: 1500
Hold timer: 10 seconds, retry times: 5
Internet Address is 1.1.1.2/24 Primary
Link layer protocol: HDLC
Physical: HDLC-BUNDLE, baudrate: 128000 bps
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 32 packets, 1842 bytes, 0 drops
Output: 27 packets, 1512 bytes, 0 drops
# Display brief information about HDLC link bundle interface 1.
<Sysname> display interface hdlc-bundle 1 brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
HDLC-B1
# Display information about all HDLC link bundle interfaces in down state and the link down reasons.
<Sysname> display interface hdlc-bundle brief down
Link Protocol Main IP
UP
UP
1.1.1.2
145
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents