<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] bandwidth 100
default
Use default to restore the default settings for a dialer interface.
Syntax
default
Views
Dialer interface view
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of
the impact of this command when you execute it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies or system restrictions. Use the display this command in interface view to
identify these commands, and then use their undo forms or follow the command reference to restore
their default settings. If your restoration attempt still fails, follow the error message instructions to
resolve the problem.
Examples
# Restore the default settings for Dialer 1.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] default
description
Use description to set a description for a dialer interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description of a dialer interface is interface-name Interface, for example, Dialer1 Interface.
Views
Dialer interface view
Predefined user roles
network-admin
287