H3C MSR810 Command Reference Manual page 373

Msr router series comware 7 layer 2 - wan access
Hide thumbs Also See for MSR810:
Table of Contents

Advertisement

Original packets assembled/fragmented (input/output): 0/0
Dropped fragments (input/output): 0/0
Unassigned fragments: 0
Bundle links:
Serial2/1/0
Link name: Serial2/1/0
Physical state: Up
Timer: ACK 4 seconds
Retry: Max 2
Bundle link negotiation statistics:
Hello (Tx/Rx):
Hello_ack (Tx/Rx):
Add_link (Tx/Rx):
Add_link_ack (Tx/Rx):
Add_link_rej (Tx/Rx):
Remove_link (Tx/Rx):
Remove_link_ack (Tx/Rx): 0/0 packets
Packets dropped (input/output): 0/0
Bundle link fragment statistics:
MFR fragments(input/output): 0/0
Table 70 Command output
Field
Physical state
Link state
Peer link name: Serial2/1/0
Link state: Up
Hello 10 seconds
Current 0
10/10 packets
10/10 packets
4/2 packets
2/1 packets
0/0 packets
0/0 packets
Description
Operating state of the physical interface:
UP—The interface is physically up.
DOWN—The interface is physically down.
Administratively down—The interface has been administratively
shut down.
Operating state of the link protocol on the bundle link:
Add sent—The interface sent an Add_link message and started
connection establishment.
Ack rx—The interface received an Add_link acknowledgement
and is expecting an Add_link message from the peer.
Add rx—The interface received an Add_link message and is
expecting an Add_link acknowledgement from the peer.
Up—The bundle link was successfully negotiated, and the
interface can send frames.
Idle—The bundle link was removed.
Down—The bundle link was physically down.
Down idle—The bundle link was physically down and removed.
361
Cause code: None

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents