Ppp Chap User - H3C MSR810 Command Reference Manual

undo ppp chap password
Default
No password is set for CHAP authentication on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
cipher: Specifies a password in encrypted form.
simple: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string: Specifies the password. Its plaintext form is a case-sensitive string of 1 to 255 characters. Its
encrypted form is a case-sensitive string of 1 to 97 characters.
Examples
# Set the password for CHAP authentication to plaintext password sysname on Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp chap password simple sysname
Related commands
ppp authentication-mode chap

ppp chap user

Use ppp chap user to set the username for CHAP authentication on an interface.
Use undo ppp chap user to restore the default.
Syntax
ppp chap user username
undo ppp chap user
Default
The username for CHAP authentication is null on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
username: Specifies the username for CHAP authentication, a case-sensitive string of 1 to 80
characters. The username is sent to the peer for the local device to be authenticated.
Usage guidelines
To pass CHAP authentication, the username/password of one side must be the local
username/password on the peer.
18