Mfr Bundle-Name - H3C MSR810 Command Reference Manual

Predefined user roles
network-admin
Examples
# Enable MFR encapsulation on interface Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] link-protocol mfr
Related commands
fr mfr

mfr bundle-name

Use mfr bundle-name to set a bundle name.
Use undo mfr bundle-name to restore the default.
Syntax
mfr bundle-name name
undo mfr bundle-name
Default
The bundle name is represented by MFR plus the bundle number, for example, MFR0/0/2.
Views
MFR interface view
Predefined user roles
network-admin
Parameters
name: Specifies a bundle name, a case-sensitive string of 1 to 49 characters.
Usage guidelines
You cannot set a bundle name as a string in the form of MFR + number.
Each MFR bundle has a bundle name, and the peer device can identify an MFR bundle by using the
bundle name. Bundle names at the two ends of a bundle can be different. Bundle names must be
unique on the same device.
The bundle names at both ends are used during the bundle link negotiation phase. After changing
the bundle name of an MFR interface, you must execute the shutdown and undo shutdown
commands on the interface to make the new bundle name take effect.
Examples
# Set the bundle name to bundle1 for interface MFR 0/0/2.
<Sysname> system-view
[Sysname] interface mfr 0/0/2
[Sysname-MFR0/0/2] mfr bundle-name bundle1
Related commands
display mfr
365