Pvc-Group - H3C MSR810 Command Reference Manual

If you have specified the PVC name when creating the PVC, you can enter the PVC view by using
the pvc pvc-name [ vpi/vci ] command, and del ete the PVC by using the undo pvc pvc-name [
vpi/vci ] or undo pvc vpi/vci command.
You can configure only one PVC on an ATM P2P subinterface.
You can create a maximum of eight PVCs in a PVC-group.
You cannot delete a PVC from a PVC-group in ATM interface view or ATM subinterface view.
Examples
# Create a PVC named aa on the interface ATM 2/4/0, and set its VPI/VCI value to 1/101.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc aa 1/101
[Sysname-ATM2/4/0-pvc-aa-1/101]
# Create a PVC named bb for PVC-group 1, and set its VPI/VCI value to 1/102.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc-group 1
[Sysname-ATM2/4/0-pvc-group-1] pvc bb 1/102
[Sysname-ATM2/4/0-pvc-group-1-pvc-bb-1/102]
Related commands
display atm pvc-info

pvc-group

pvc-group
Use pvc-group to create a PVC-group and enter its view, or enter the view of an ex isting
PVC-group.
Use undo pvc-group to delete the specified PVC-group.
Syntax
pvc-group group-number
undo pvc-group group-number
Default
No PVC-groups exist.
Views
ATM interface view
ATM subinterface view
Predefined user roles
network-admin
Parameters
group-number: Specifies a PVC-group by its number in the range of 1 to 128.
Usage guidelines
A PVC-group can share traffic load among PVCs in it by transmitting IP packets of different priorities
through different PVCs.
220