H3C MSR810 Command Reference Manual page 369

Table 67 Command output
Field
Current state
Line protocol state
Description
Bandwidth
Maximum Transmit Unit
Hold timer
retry times
Internet protocol processing
Link layer protocol is FR IETF
LMI DLCI is 0, LMI type is
Q.933a, Frame Relay DTE
LMI status enquiry sent 0, LMI
status received 0
LMI status timeout 0, LMI
message discarded 0
Physical
Output queue - Urgent queuing:
Size/Length/Discards 0/100/0
Output queue - Protocol queuing:
Size/Length/Discards 0/500/0
Output queue - FIFO queuing:
Size/Length/Discards 0/75/0
Last clearing of counters: Never
Last 300 seconds input rate: 0
bytes/sec, 0 bits/sec, 0
packets/sec
Last 300 seconds output rate: 0
bytes/sec, 0 bits/sec, 0
packets/sec
Description
Physical state and administrative state of the MFR interface:
• Administratively DOWN—The interface has been shut down by
using the shutdown command.
• DOWN—The interface is administratively up, but its physical state
is down (possibly because no physical link exists or the link has
failed).
• UP—The interface is both administratively and physically up.
Data link layer state of the interface:
• UP—The data link layer protocol is up.
• DOWN—The data link layer protocol is down.
Description of the MFR interface.
Expected bandwidth of the MFR interface.
MTU of the MFR interface.
Interval for the MFR interface to send keepalive messages.
Number of times that the interface sends a keepalive message.
IP packet processing capability:
• Enabled—The MFR interface can process IP packets.
• Disabled—The MFR interface cannot process IP packets.
Encapsulation type of the MFR interface:
• IETF.
• Nonstandard.
DLCI number used by LMI, LMI type, and port type.
Q.933a LMI and ANSI LMI use DLCI 0, and nonstandard LMI uses DLCI
1023.
Number of sent status enquiry messages and number of received status
messages.
Number of status messages that timed out and number of discarded
messages.
Physical type of the interface.
Statistics on the packets of the following interface output queues:
• Urgent queue.
• Protocol queue.
• FIFO queue.
Time when the interface statistics were last cleared.
Never indicates that the interface statistics have never been cleared
since device startup.
Average input rate of the MFR interface in the last 5 minutes.
Average output rate of the MFR interface in the last 5 minutes.
357