Field
Cause code
Timer: Ack
Hello
Retry: Max
Current
Hello (Tx/Rx)
Hello_ack (Tx/Rx)
Add_link_ack (Tx/Rx)
Add_link_rej (Tx/Rx)
Remove_link (Tx/Rx)
Remove_link_ack (Tx/Rx)
Packets dropped (input/output)
MFR fragments (input/output)
Related commands
mfr bundle-name
mfr fragment size
mfr fragment enable
mfr link-name
mfr retry
mfr timer ack
mfr timer hello
Description
Cause code for a bundle link state:
•
None—Initial state.
•
Ack timer expired—The ACK timer expires.
•
Bundle link idle—The bundle link is not operational.
•
Inconsistent bundle—Possible configuration mismatch
detected.
•
Loopback detected—The bundle link has detected a potential
loopback condition.
•
Unexpected add_link—An ADD_LINK message was received
when the bundle link was in up state.
•
Other—Generic failure cause described by text in diagnostic
element.
Amount of time for which the bundle link waits for a hello or Add_link
acknowledgement before retransmitting a hello message or an
Add_link message (for initial synchronization).
Interval for the bundle link to send hello messages.
Maximum number of times that the bundle link can retransmit a hello or
Add_link message before receiving a hello or Add_link
acknowledgement.
Number of retries that have been made.
Number of hello messages sent/received.
Number of hello acknowledgements sent/received.
Number of Add_link acknowledgements sent/received.
An Add_link acknowledgement notifies the peer that the local end
received an Add_link message.
Number of Add_link reject messages sent/received.
An Add_link_rej message notifies the peer that the local end rejected
an Add_link message.
Number of Remove_link messages sent/received.
A Remove_link message notifies that the local end is removing a
bundle link from the bundle.
Number of Remove_link acknowledgements sent/received.
A Remove_link acknowledgement notifies the peer that the local end
received a Remove_link message.
Number of incoming/outgoing packets dropped.
Number of fragments sent/received by the bundle link.
362