Mtu - H3C MSR810 Command Reference Manual

Parameters
number: Specifies a VT interface by its number.
The following matrix shows the value ranges for the number argument:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-H
K/810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR 3610
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3620/3620-DP/3640/3660
MSR5620/5660/5680
Usage guidelines
To remove a VT interface, make sure all the corresponding VA interfaces are removed and the VT
interface is not in use.
Examples
# Create interface Virtual-Template 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10]

mtu

Use mtu to set the MTU size of an interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU size of an interface is 1500 bytes.
Views
VT interface view
MP-group interface view
Predefined user roles
network-admin
Parameters
size: Specifies the MTU size in the range of 128 to 1500 bytes.
47
Value range
0 to 1023
0 to 1023
0 to 1023
0 to 1023
0 to 1023
0 to 1023
0 to 2047
0 to 2047
0 to 4095