Interface Hdlc-Bundle; Mtu - H3C MSR810 Command Reference Manual

interface hdlc-bundle

Use interface hdlc-bundle to create an HDLC link bundle interface and enter its view, or enter the
view of an existing HDLC link bundle interface.
Use undo interface hdlc-bundle to delete an HDLC link bundle interface.
Syntax
interface hdlc-bundle bundle-id
undo interface hdlc-bundle bundle-id
Default
No HDLC link bundle interface exists.
Views
System view
Predefined user roles
network-admin
Parameters
bundle-id: Specifies an HDLC link bundle interface by its number in the range of 1 to 10.
Examples
# Create HDLC link bundle interface 1 and enter its view.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-HDLC-bundle1]

mtu

Use mtu to set the MTU size for an HDLC link bundle interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU size of an HDLC link bundle interface is 1500 bytes.
Views
HDLC link bundle interface view
Predefined user roles
network-admin
Parameters
size: Specifies the MTU in bytes for an HDLC link bundle interface, in the range of 46 to 1560.
Usage guidelines
The MTU size of an interface affects IP packet fragmentation and reassembly on the interface.
To make the MTU configuration take effect on an interface, you must re-enable the interface by using
the shutdown command and the undo shutdown command.
148