Service Cbr - H3C MSR810 Command Reference Manual

Usage guidelines
Before you collect traffic statistics within a specific time period on an interface, clear the existing
statistics for the interface.
If you do not specify the virtual-ethernet keyword, this command clears statistics for all interfaces.
If you specify the virtual-ethernet keyword but do not specify the interface-number argument, this
command clears statistics for all VE interfaces.
If you specify both the virtual-ethernet keyword and the interface-number argument, this command
clears statistics for the specified VE interface.
Examples
# Clear statistics for the interface Virtual-Ethernet 2/4/1.
<Sysname> reset counters interface virtual-ethernet2/4/1

service cbr

Use service cbr to set the PVC service type to CBR and set the related parameters.
Use undo service to restore the default.
Syntax
service cbr output-pcr [ cdvt cdvt_value ]
undo service
Default
The service type of a PVC is UBR. The peak output rate of ATM cells equals the maximum
bandwidth of the interface to which the PVC belongs.
Views
PVC view
PVC view in a PVC-group
Predefined user roles
network-admin
Parameters
output-pcr: Specifies the peak output rate of ATM cells in kbps.
the output-pcr argument on different interfaces.
Table 47 Peak output rate value ranges
Interface type
ATM ADSL2+
ATM SHDSL_4WIRE
ATM SHDSL_8WIRE_BIS
ATM OC-3c/STM-1
ATM subinterface
PVC-group
cdvt cdvt_value: Specifies the cell delay variation tolerance in the range of 0 to 10000 μs. The
default is 500 μs, which means that the maximum cell delay is 500 μs.
Table 47
Peak output rate value range
64 to 640
128 to 4624
256 to 22784
64 to 155000
Same as that of the ATM interface to which the ATM
subinterface belongs.
Same as that of the ATM interface to which the
PVC-group belongs.
223
shows the value ranges for