Mfr Link-Name; Mfr Retry - H3C MSR810 Command Reference Manual

mfr link-name

Use mfr link-name to set the bundle link name for a Frame Relay interface.
Use undo mfr link-name to restore the default.
Syntax
mfr link-name name
undo mfr link-name
Default
The bundle link name is the name of the physical interface, for example, Serial 2/1/0.
Views
Frame Relay interface view
Predefined user roles
network-admin
Parameters
name: Specifies the bundle link name, a case-sensitive string of 1 to 49 characters.
Usage guidelines
Use link-protocol mfr to enable MFR encapsulation on a Frame Relay interface before configuring
the mfr link-name command on the interface.
The bundle link name identifies the bundle link to the peer device and enables the local device to
determine which bundle links are bound to which bundles. The bundle link names in a bundle must
be unique on the same device. The local and peer bundle link names can be different.
The local and peer bundle link names are used during the bundle link negotiation phase. After
changing the bundle link name on an interface, you must execute the shutdown and undo
shutdown commands on the interface to make the new bundle link name take effect.
Examples
# Set the bundle link name to bl1 for interface Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] link-protocol mfr
[Sysname-Serial2/1/0] mfr link-name bl1
Related commands
link-protocol mfr

mfr retry

Use mfr retry to set the maximum number of times that a bundle link can resend a hello message
when waiting for a hello acknowledgement.
Use undo mfr retry to restore the default.
Syntax
mfr retry retries
undo mfr retry
368