Ppp Mp; Ppp Mp Binding-Mode - H3C MSR810 Command Reference Manual

Usage guidelines
The MTU size setting of an interface affects the fragmentation and reassembly of IP packets on that
interface.
For the configured MTU size to take effect, you must execute the shutdown command and then
the undo shutdown command on the interface.
Examples
# Set the MTU size of Virtual-Template 10 to 1400 bytes.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] mtu 1400
# Set the MTU size of MP-group 2/0/0 to 1200 bytes.
<Sysname> system-view
[Sysname] interface mp-group 2/0/0
[Sysname-MP-group2/0/0] mtu 1200

ppp mp

Use ppp mp to enable MP for an interface.
Use undo ppp mp to disable MP on an interface.
Syntax
ppp mp
undo ppp mp
Default
An interface is enabled with PPP.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
To obtain more bandwidth, you can bind multiple PPP links to form a logical MP interface.
Examples
# Enable MP for Serial 2/1/0.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp mp

ppp mp binding-mode

Use ppp mp binding-mode to set the MP binding mode on an interface.
Use undo ppp mp binding-mode to restore the default.
Syntax
ppp mp binding-mode { authentication | both | descriptor }
undo ppp mp binding-mode
48