H3C MSR810 Command Reference Manual page 16

• Username.
• Authentication information.
• Uplink and downlink traffic.
• Access start time of the PPP user.
Examples
# Display brief information about PPP users on GigabitEthernet 1/0/1.
<Sysname> display ppp access-user interface gigabitethernet 1/0/1
Interface
VA0
VA1
# Display the total number of PPP users on GigabitEthernet 1/0/1.
<Sysname> display ppp access-user interface gigabitethernet 1/0/1 count
Total users: 2
Table 2 Command output
Field
Interface
Username
MAC address
IP address
IPv6 address
IPv6 PDPrefix
Total users
# Display detailed information about the PPP user whose IP address is 50.50.50.3.
<Sysname> display ppp access-user ip-address 50.50.50.3
Basic:
Interface: VA0
User ID: 0x28000002
Username: user1@hrss
Domain: hrss
Access interface: RAGG2
Service-VLAN/Customer-VLAN: -/-
MAC address: 0000-0000-0001
IP address: 50.50.50.3
IPv6 address: -
IPv6 PD prefix: -
VPN instance: 123
Access type: PPPoE
Authentication type: CHAP
Username MAC address
user1@h3c 0001-0101-9101 192.168.100.173
user2@h3c 0001-0101-9101 192.168.80.173
IP address
Description
Name of the VA interface corresponding to the user.
Username of the user.
A hyphen (-) means that the user does not need authentication.
MAC address of the user.
A hyphen (-) means that the user is not a PPPoE user.
IP address of the user. A hyphen (-) means that no IP address is
assigned to the user.
IPv6 address of the user. A hyphen (-) means that no IPv6 address
is assigned to the user.
IPv6 prefix of the user. A hyphen (-) means that no IPv6 prefix is
assigned to the user.
Total number of PPP users.
4
IPv6 address IPv6 PDPrefix
- -
2000::1 -