4G Modem-Specific Management Commands; Apn - H3C MSR810 Command Reference Manual

Default
No WCDMA band is specified.
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
wcdma800: Specifies the WCDMA 800 MHz band.
wcdma850: Specifies the WCDMA 850 MHz band.
wcdma900: Specifies the WCDMA 900 MHz band.
wcdma1700jp: Specifies the Japan WCDMA 1700 MHz band.
wcdma1700us: Specifies the US WCDMA 1700 MHz band.
wcdma1800: Specifies the WCDMA 1800 MHz band.
wcdma1900: Specifies the WCDMA 1900 MHz band.
wcdma2100: Specifies the WCDMA 2100 MHz band.
wcdma2600: Specifies the WCDMA 2600 MHz band.
Usage guidelines
IMPORTANT:
This command is supported only by Sierra MC7354 (ATT version) and MC7304 4G modules.
Multiple frequency bands are available for accessing the WCDMA network. When the network
environment changes, the 3G/4G modem might change the working band automatically to adapt to
the change. To avoid link instability caused by frequency changes, you can specify a W CDMA
frequency band for the 3G/4G modem.
Examples
# Specify the WCDMA 1700 MHz band for the 3G/4G modem.
<Sysname> system-view
[Sysname] controller cellular 0/0
[Sysname-Cellular0/0] wcdma band wcdma1700
Related commands
gsm band
lte band

4G modem-specific management commands

apn

Use apn to create an access point name (APN) for a 4G modem.
Use undo apn to remove an APN.
Syntax
apn { dynamic | static apn }
270