Display Fr Lmi - H3C MSR810 Command Reference Manual

dlci dlci-number: Specifies a VC by its DLCI in the range of 16 to 1007.
• If you specify a main interface and a VC that is not on the main interface or any of its
subinterfaces, this command does not display IPv6 address mapping for the VC.
• If you specify a subinterface and a VC that is not on the subinterface, this command does not
display IPv6 address mapping for the VC.
• If you specify only an interface, this command displays IPv6 address mapping for all VCs on the
interface.
Usage guidelines
If you do not specify the static or dynamic keyword, this command displays both static and dynamic
address mapping.
Examples
# Display Frame Relay IPv6 address mapping.
<Sysname> display fr ipv6 map
Map statistics for interface Serial2/1/0 (DTE)
DLCI: 100
Create time: 2014/10/11 09:57:28
Encapsulation: IETF
DLCI: 100
Create time: 2014/10/11 09:57:28
Encapsulation: IETF
DLCI: 100
Create time: 2014/10/11 09:57:28
Encapsulation: IETF
Table 63 Command output
Field
Map Statistics for interface Serial2/1/0 (DTE)
DLCI: 100
IPv6 IND 10::1
Interface: Serial2/1/0
Create time: 2014/10/11 09:57:28
Status: Active
Encapsulation: IETF
Broadcast

display fr lmi

Use display fr lmi to display LMI information.
Syntax
display fr lmi [ interface interface-type interface-number ]
IPv6 IND: FE80::56FF:FE00:0
Broadcast
IPv6 IND: 10::1 Interface: Serial2/1/0
Broadcast
IPv6: 10::3 Interface: Serial2/1/0
Broadcast
Interface: Serial2/1/0
Status: Active
Status: Active
Status: Active
Description
IPv6 address-to-DLCI maps for Serial 2/1/0 (a DTE
interface).
VC identified by the DLCI number.
Address map established with the peer IPv6 address
10::1 through IND.
If IND is absent, the address map is manually
configured.
Interface where the VC was created.
Time when the address map was created.
Status of the address map: Active or Inactive.
Encapsulation type for the VC: IETF or Nonstandard.
Broadcast packets are allowed on the VC.
327