Match Local (Ikev2 Profile View) - H3C MSR Series Command Reference Manual

Use undo keychain to restore the default.
Syntax
keychain keychain-name
undo keychain
Default
No IKEv2 keychain is specified for an IKEv2 profile.
Views
IKEv2 profile view
Predefined user roles
network-admin
Parameters
keychain-name: Specifies an IKEv2 keychain by its name. The keychain name is a case-insensitive
string of 1 to 63 characters and cannot contain a hyphen (-).
Usage guidelines
An IKEv2 keychain is required on both ends if either end uses pre-shared key authentication. You
can specify only one IKEv2 keychain for an IKEv2 profile.
You can specify the same IKEv2 keychain for different IKEv2 profiles.
Examples
# Create an IKEv2 profile named profile1.
<Sysname> system-view
[Sysname] ikev2 profile profile1
# Specify the IKEv2 keychain keychain1.
[Sysname-ikev2-profile-profile1] keychain keychain1
Related commands
display ikev2 profile
ikev2 keychain

match local (IKEv2 profile view)

Use match local to specify a local interface or a local IP address to which an IKEv2 profile can be
applied.
Use undo match local to remove a local interface or a local IP address to which an IKEv2 profile can
be applied.
Syntax
match local address { interface-type interface-number | ipv4-address | ipv6 ipv6-address }
undo match local address { interface-type interface-number | ipv4-address | ipv6 ipv6-address }
Default
An IKEv2 profile can be applied to any local interface or local IP address.
Views
IKEv2 profile view
639