Table 152 Command output
Field
IP address
VPN
Detected on
Detect type
State
PPS
Dropped
Totally 2 flood entries
display attack-defense flood statistics ipv6
Use display attack-defense flood statistics ipv6 to display IPv6 flood attack detection and
prevention statistics.
Syntax
Centralized devices in standalone mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ interface interface-type interface-number | local ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ [ interface interface-type interface-number | local ] [ slot slot-number ] ]
[ count ]
Distributed devices in IRF mode:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood |
rst-flood | syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn
vpn-instance-name ] ] [ [ interface interface-type interface-number | local ] [ chassis
chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ack-flood: Specifies ACK flood attack.
dns-flood: Specifies DNS flood attack.
fin-flood: Specifies FIN flood attack.
Description
Protected IPv4 address.
MPLS L3VPN instance to which the protected IPv4 address belongs. If the
protected IPv4 address is on the public network, this field displays
hyphens (--).
Where the attack is detected, on the device (Local) or an interface.
Type of the detected flood attack.
Whether the interface or device is attacked:
•
Attacked.
•
Normal.
Number of packets sent to the IPv4 address per second.
Number of attack packets dropped by the interface or the device.
Total number of IPv4 addresses that are protected.
992