H3C MSR Series Command Reference Manual page 892

Comware 7 security
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Protocol: TCP(6)
Source IP/port:
Destination IP/port: 192.168.2.200/1212
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Total entries found:
# (Centralized devices in standalone mode.) Display all IPv6 relation entries.
<Sysname> display session relation-table ipv6
Source IP:
Destination IP/port: 2011::0008/1212
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Total entries found:
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display all IPv6 relation
entries.
<Sysname> display session relation-table ipv6
Slot 1:
Source IP:
Destination IP/port: 2011::0008/1212
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Total entries found:
Table 132 Command output
Field
Source IP/port
Destination IP/port
DS-Lite tunnel peer
VPN instance/VLAN ID/Inline ID
Protocol
TTL
App
TTL: 1234s
App: FTP-DATA
-/-
TTL: 3100s
App: H225
2
2011::0002
TTL: 567s
App: FTP-DATA
1
2011::0002
TTL: 567s
App: FTP-DATA
1
Description
Source IP address and port number of the session. If the IP or port
number is not specified, this field displays a hyphen (-).
For an IPv6 relation entry, the source port number is not displayed.
Destination IP address and port number of the session.
Peer tunnel interface address of the DS-Lite tunnel to which the
session belongs. If no peer tunnel interface address is specified, a
hyphen (-) is displayed.
MPLS L3VPN instance to which the relation entry belongs.
VLAN and inline to which the relation entry belongs during Layer 2
forwarding.
If a parameter is not specified, a hyphen (-) is displayed for the proper
field.
Transport layer protocol.
Remaining lifetime of the relation entry, in seconds.
Application layer protocol.
869

Advertisement

Table of Contents
loading

Table of Contents