Display Attack-Defense Top-Attack-Statistics - H3C MSR Series Command Reference Manual

ICMP time exceeded
ICMP parameter problem
ICMP timestamp request
ICMP timestamp reply
ICMP information request
ICMP information reply
ICMP address mask request
ICMP address mask reply
ICMPv6 echo request
ICMPv6 echo reply
ICMPv6 group membership query
ICMPv6 group membership report
ICMPv6 group membership reduction
ICMPv6 destination unreachable
ICMPv6 time exceeded
ICMPv6 parameter problem
ICMPv6 packet too big
Table 163 Command output
Field
AttackType
AttackTimes
Dropped
Related commands
reset attack-defense statistics local

display attack-defense top-attack-statistics

Use display attack-defense top-attack-statistics to display top ten attack statistics.
Syntax
display attack-defense top-attack-statistics { last-1-hour | last-24-hours | last-30-days }
[ by-attacker | by-type | by-victim ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
last-1-hour: Specifies the most recent 1 hour.
last-24-hours: Specifies the most recent 24 hours.
last-30-days: Specifies the most recent 30 days.
by-attacker: Displays top ten attack statistics by attacker.
3
4
5
6
7
4
2
1
1
1
1
1
1
1
1
1
1
Description
Type of the attack.
Number of times that the attack occurred.
This command output displays only attacks that are detected.
Number of dropped packets.
1024
0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0