Display Application - H3C MSR Series Command Reference Manual

Field
pre-defined app-group count
Include pre-defined app-group list
App-group name
App-group ID
Related commands
app-group
include

display application

Use display application to display information about the specified application protocols.
Syntax
display application [ name application-name | pre-defined | user-defined ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name application-name: Specifies an application protocol by its name. The application-name
argument is a case-insensitive string of 1 to 63 characters. The names invalid and other are not
allowed.
pre-defined: Specifies the predefined application protocols.
user-defined: Specifies the user-defined application protocols.
Usage guidelines
If you do not specify any parameters, this command displays information about all application
protocols.
Examples
# Display information about all predefined application protocols.
<Sysname> display application pre-defined
Pre-defined count: 817
Application name
Description
Number of predefined application groups in the
application group.
This field is not supported in the current software
version.
List of predefined application groups.
This field is not supported in the current software
version.
Name of a predefined application group.
This field is not supported in the current software
version.
ID of a predefined application group.
This field is not supported in the current software
version.
Type App ID
839
Tunnel Encrypted DetectLen