Object-Policy Ip - H3C MSR Series Command Reference Manual

Examples
# Configure an IPv6 object policy and apply it to a zone pair.
<Sysname> system-view
[Sysname] object-policy ipv6 permit
[Sysname-object-policy-ipv6-permit] quit
[Sysname] zone-pair security source office destination library
[Sysname-zone-pair-security-office-library] object-policy apply ipv6 permit
Related commands
display object-policy zone-pair security
object-policy apply ip
object-policy ipv6

object-policy ip

Use object-policy ip to configure an IPv4 object policy and enter its view, or enter the view of an
existing IPv4 object policy.
Use undo object-policy ip to delete an IPv4 object policy.
Syntax
object-policy ip object-policy-name
undo object-policy ip object-policy-name
Default
No IPv4 object policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
object-policy-name: Specifies an IPv4 object policy name, a case-insensitive string of 1 to 63
characters.
Usage guidelines
The IPv4 object policy name is unchangeable once configured.
You cannot delete an IPv4 object policy that has been applied to a zone pair.
Examples
# Configure an IPv4 object policy and enter its view.
<Sysname> system-view
[Sysname] object-policy ip permit
[Sysname-object-policy-ip-permit] rule pass
Related commands
display object-policy ip
object-policy ipv6
962