Ip Source Binding (Interface View) - H3C MSR Series Command Reference Manual

Related commands
ipv6 source binding
ipv6 verify source

ip source binding (interface view)

Use ip source binding to configure a static IPv4SG binding on an interface.
Use undo ip source binding to delete the static IPv4SG bindings configured on an interface.
Syntax
ip source binding { ip-address ip-address | ip-address ip-address mac-address mac-address |
mac-address mac-address } [ vlan vlan-id ]
undo ip source binding { all | ip-address ip-address | ip-address ip-address mac-address
mac-address | mac-address mac-address } [ vlan vlan-id ]
Default
No static IPv4SG bindings exist on an interface.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
all: Removes all static IPv4SG bindings on the interface.
ip-address ip-address: Specifies an IPv4 address for the static binding. The IPv4 address must be a
class A, B, or C address, and cannot be 127.x.x.x or 0.0.0.0.
mac-address mac-address: Specifies a MAC address for the static binding. The MAC address must
be in H-H-H format, and cannot be all 0s, all Fs (a broadcast MAC address), or a multicast MAC
address.
vlan vlan-id: Specifies a VLAN ID for the static binding. The value range is 1 to 4094.
1099