Description - H3C MSR Series Command Reference Manual

Related commands
local-user

description

Use description to configure a description for an IKE proposal.
Use undo description to restore the default.
Syntax
description text
undo description
Default
An IKE proposal does not have a description.
Views
IKE proposal view
Predefined user roles
network-admin
Parameters
text: Specifies the description, a case-sensitive string of 1 to 80 characters.
Usage guidelines
You can configure different descriptions for IKE proposals to distinguish them.
Examples
# Configure a description of test for IKE proposal 1.
<Sysname> system-view
[Sysname] ike proposal 1
[Sysname-ike-proposal-1] description test
dh
Use dh to specify the DH group to be used for key negotiation in IKE phase 1.
Use undo dh to restore the default.
Syntax
In non-FIPS mode:
dh { group1 | group14 | group2 | group24 | group5 }
undo dh
In FIPS mode:
dh group14
undo dh
Default
In non-FIPS mode, group1, the 768-bit Diffie-Hellman group, is used.
In FIPS mode, group14, the 2048-bit Diffie-Hellman group, is used.
578