Display Web-Redirect Rule - H3C MSR Series Command Reference Manual

Table 39 Command output
Field
Type
Portal Web server
URL
URL parameters
VPN instance
Server detection
IPv4/IPv6 status
Captive-bypass
If-match
Related commands
portal enable
portal web-server
server-detect (portal Web server view)

display web-redirect rule

Use display web-redirect rule to display information about Web redirect rules.
Syntax
Centralized devices in standalone mode:
display web-redirect rule { ap ap-name [ radio radio-id ] | interface interface-type
interface-number }
Distributed devices in standalone mode/centralized devices in IRF mode:
display web-redirect rule interface { ap ap-name [ radio radio-id ] | interface-type
interface-number [ slot slot-number ] }
Distributed devices in IRF mode:
display web-redirect rule interface { ap ap-name [ radio radio-id ] | interface-type
interface-number [ chassis chassis-number slot slot-number ] }
Description
Portal Web server type:
•
CMCC—CMCC server.
•
IMC—IMC server.
Name of the portal Web server.
URL of the portal Web server.
URL parameters for the portal Web server.
Name of the MPLS L3VPN where the portal Web server resides.
Parameters for portal Web server detection:
•
Detection interval in seconds.
•
Maximum number of detection attempts.
•
Action (log) triggered by the reachability status change of the portal Web
server.
Current state of the portal Web server:
•
Up—This value indicates one of the following conditions:
Portal Web server detection is disabled.

Portal Web server detection is enabled and the server is reachable.

•
Down—Portal Web server detection is enabled and the server is unreachable.
Status of the captive-bypass feature:
•
Disabled—Captive-bypass is disabled.
•
Enabled—Captive-bypass is enabled.
•
Optimize Enabled—Optimized captive-bypass is enabled.
Match rules configured for URL redirection and temporary pass.
296