H3C MSR Series Command Reference Manual page 1162

Syntax
fips self-test
Views
System view
Predefined user roles
network-admin
Usage guidelines
To examine whether the cryptography modules operate correctly, you can use this command to
trigger a self-test on the cryptographic algorithms. The triggered self-test is the same as the
power-up self-test.
A successful self-test requires that all cryptographic algorithms pass the self-test. If the self-test fails,
the card where the self-test process exists reboots.
Examples
# Trigger a self-test on the cryptographic algorithms.
<Sysname> system-view
[Sysname] fips self-test
Cryptographic Algorithms Known-Answer Tests are running ...
CPU 1 of slot 1 in chassis 1:
Starting Known-Answer tests in the user space.
Known-answer test for SHA1 passed.
Known-answer test for SHA224 passed.
Known-answer test for SHA256 passed.
Known-answer test for SHA384 passed.
Known-answer test for SHA512 passed.
Known-answer test for HMAC-SHA1 passed.
Known-answer test for HMAC-SHA224 passed.
Known-answer test for HMAC-SHA256 passed.
Known-answer test for HMAC-SHA384 passed.
Known-answer test for HMAC-SHA512 passed.
Known-answer test for AES passed.
Known-answer test for RSA(signature/verification) passed.
Known-answer test for RSA(encrypt/decrypt) passed.
Known-answer test for DSA(signature/verification) passed.
Known-answer test for random number generator passed.
Known-Answer tests in the user space passed.
Starting Known-Answer tests in the kernel.
Known-answer test for SHA1 passed.
Known-answer test for HMAC-SHA1 passed.
Known-answer test for AES passed.
Known-answer test for random number generator passed.
Known-Answer tests in the kernel passed.
CPU 1 of slot 2 in chassis 1:
Starting Known-Answer tests in the user space.
Known-answer test for SHA1 passed.
Known-answer test for SHA224 passed.
1139