Whitelist Object-Group - H3C MSR Series Command Reference Manual

Predefined user roles
network-admin
Usage guidelines
If you enable the global whitelist feature, the whitelist feature is enabled on all interfaces.
Examples
# Enable the global whitelist feature.
<Sysname> system-view
[Sysname] whitelist global enable

whitelist object-group

Use whitelist object-group to add an address object group to the whitelist.
Use undo whitelist object-group to restore the default.
Syntax
whitelist object-group object-group-name
undo whitelist object-group
Default
No address object group is added to the whitelist.
Views
System view
Predefined user roles
network-admin
Parameters
object-group-name: Specifies an address object group by its name, a case-insensitive string of 1 to
31 characters.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE
/810-LM-HK/810-W-LM-HK
MSR810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
This command must be used together with the address object group feature. For more information
about address object groups, see "Configuring object groups."
Command compatibility
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1092