Portal Temp-Pass Enable - H3C MSR Series Command Reference Manual

Views
System view
Predefined user roles
network-admin
Parameters
server-name: Specifies a portal authentication server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
In portal authentication server view, you can configure the following parameters and features for the
portal authentication server:
•
IP address of the server.
•
Destination UDP port number used by the device to send unsolicited portal packets to the portal
authentication server.
•
MPLS L3VPN where the portal authentication server resides.
•
Pre-shared key for communication between the access device and the server.
•
Server detection feature.
You can configure multiple portal authentication servers for an access device.
Examples
# Create portal authentication server pts and enter its view.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts]
Related commands
display portal server

portal temp-pass enable

Use portal temp-pass enable to enable portal temporary pass and set the temporary pass period.
Use undo portal temp-pass enable to disable portal temporary pass.
Syntax
portal temp-pass [ period period-value ] enable
undo portal temp-pass enable
Default
Portal temporary pass is disabled.
Views
Interface view
Service template view
Predefined user roles
network-admin
Parameters
period period-value: Specifies the temporary pass period. The value range for the period-value
argument is 10 to 3600 seconds, and the default is 30 seconds.
373