Portal Client-Gateway Interface; Portal Client-Traffic-Report Interval - H3C MSR Series Command Reference Manual

portal client-gateway interface

Use portal client-gateway interface to specify the AC's interface for portal clients to access during
third-party authentication.
Use undo portal client-gateway interface to restore the default.
Syntax
portal client-gateway interface interface-type interface-number
undo portal client-gateway interface
Default
No AC's interface is specified for portal clients to access during third-party authentication.
Views
System view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
When client traffic is forwarded by APs and third-party portal authentication is used, the client does
not know the IP address of the AC. For the client to access AC successfully, specify an interface of
the AC, so the client can obtain the AC's IP address and access the AC.
Examples
# Specify VLAN-interface 100 on the AC for clients to access during third-party authentication.
<Sysname> system-view
[Sysname] portal client-gateway interface vlan-interface 10

portal client-traffic-report interval

Use portal client-traffic-report interval to set the interval at which an AP reports traffic statistics to
the device.
Use undo portal client-traffic-report interval to restore the default.
Syntax
portal client-traffic-report interval interval
undo portal client-traffic-report interval
Default
An AP reports traffic statistics to the device at an interval of 60 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval at which an AP reports traffic statistics to the device, in the range of 1
to 3600 seconds.
330