Client Registration - H3C MSR Series Command Reference Manual

Examples
# Set the anti-replay window size to 50 seconds for GDOI GM group group1.
<Sysname> system-view
[Sysname] gdoi gm group group1
[Sysname-gdoi-gm-group-group1] client anti-replay window sec 50
Related commands
display gdoi gm anti-replay

client registration

Use client registration to specify a registration interface for a GM in a GDOI GM group. The GM
uses the registration interface to send packets to the KS.
Use undo client registration to restore the default.
Syntax
client registration interface interface-type interface-number
undo client registration interface
Default
A GM uses the output interface of the route to the KS as the registration interface.
Views
GDOI GM group view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies a registration interface by its type and number.
Usage guidelines
The default registration interface of a GM is the output interface of the route from the GM to the KS.
The interface might also be used for traffic forwarding. When a lot of traffic travels through the
interface, packet exchange between the GM and the KS is affected. To resolve the problem, specify
an interface that is not used for traffic forwarding as the registration interface.
A GM uses the primary IPv4 address of the registration interface as the source address to register
with the KS.
For a successful GM registration, make sure the registration interface and a KS in the GDOI GM
group belong to the same VRF.
Examples
# In GDOI GM group abc, specify interface GigabitEthernet 1/0/1 as the registration interface for the
GM.
<Sysname> system-view
[Sysname] gdoi gm group abc
[Sysname-gdoi-gm-group-abc] client registration interface gigabitethernet 1/0/1
Related commands
gdoi gm group
654