Display Attack-Defense Statistics Local - H3C MSR Series Command Reference Manual

Comware 7 security

Hide thumbs Also See for MSR Series:

Table of Contents

Table 162 Command output

display attack-defense statistics local

Use display attack-defense statistics local to display attack detection and prevention statistics for

Centralized devices in standalone mode:

display attack-defense statistics local

Distributed devices in standalone mode/centralized devices in IRF mode:

display attack-defense statistics local [ slot slot-number ]

Distributed devices in IRF mode:

display attack-defense statistics local [ chassis chassis-number slot slot-number ]

Predefined user roles

network-admin

network-operator

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command

displays attack detection and prevention statistics for all cards. (Distributed devices in standalone

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member

device, this command displays attack detection and prevention statistics for all IRF member devices.

(Centralized devices in IRF mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The

chassis-number argument represents the member ID of the IRF member device. The slot-number

argument represents the slot number of the card. If you do not specify a card, this command displays

attack detection and prevention statistics for all cards. (Distributed devices in IRF mode.)

# (Centralized devices in standalone mode.) Display attack detection and prevention statistics for the

<Sysname> display attack-defense statistics local

Attack defense policy name: abc

Scan attack defense statistics:

Type of the attack.

Number of times that the attack occurred.

This command output displays only attacks that are detected.

Number of dropped packets.

AttackTimes Dropped