Sslvpn Context - H3C MSR Series Command Reference Manual

If you execute this command multiple times, the new configuration overwrites the previous
configuration, but does not take effect. For the new configuration to take effect, disable the SSL VPN
gateway and then enable the SSL VPN gateway.
Examples
# Apply SSL server policy CA_CERT to SSL VPN gateway gw1.
<Sysname> system-view
[Sysname] sslvpn gateway gw1
[Sysname-sslvpn-gateway-gw1] ssl server-policy CA_CERT
Related commands
display sslvpn gateway
service enable

sslvpn context

Use sslvpn context to create an SSL VPN context and enter its view, or enter the view of an existing
SSL VPN context.
Use undo sslvpn context to delete an SSL VPN context.
Syntax
sslvpn context context-name
undo sslvpn context context-name
Default
No SSL VPN contexts exist.
Views
System view
Predefined user roles
network-admin
Parameters
context-name: Specifies an SSL VPN context name, a case-insensitive string of 1 to 31 characters.
Valid characters are letters, digits, and underscores (_).
Usage guidelines
SSL VPN contexts contain different user sessions, accessible resources, and user authentication
methods.
An SSL VPN gateway can be associated with multiple SSL VPN contexts. After a remote user logs in
to an SSL VPN gateway, the user can access only the resources in the SSL VPN context to which the
user belongs.
Examples
# Create an SSL VPN context named ctx1 and enter its view.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1]
Related commands
display sslvpn context
798