Reset Session Statistics - H3C MSR Series Command Reference Manual

argument represents the slot number of the card. If you do not specify a card, this command clears
relation entries for all cards. (Distributed devices in IRF mode.)
Usage guidelines
If you do not specify the IPv4 keyword or the IPv6 keyword, this command clears all IPv4 and IPv6
relation entries.
Examples
# Clear all IPv4 relation entries.
<Sysname> reset session relation-table ipv4
Related commands
display session relation-table

reset session statistics

Use reset session statistics to clear unicast session statistics.
Syntax
Centralized devices in standalone mode:
reset session statistics
Distributed devices in standalone mode/centralized devices in IRF mode:
reset session statistics [ slot slot-number ]
Distributed devices in IRF mode:
reset session statistics [ chassis chassis-number slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
clears unicast session statistics for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command clears unicast session statistics for all member devices. (Centralized devices
in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command clears
unicast session statistics for all cards. (Distributed devices in IRF mode.)
Examples
# Clear all unicast session statistics.
<Sysname> reset session statistics
Related commands
display session statistics
901