Reset Ike Sa; Reset Ike Statistics - H3C MSR Series Command Reference Manual

[Sysname-ike-profile-prof1] proposal 10
Related commands
ike proposal

reset ike sa

Use reset ike sa to delete IKE SAs.
Syntax
reset ike sa [ connection-id connection-id ]
Views
User view
Predefined user roles
network-admin
Parameters
connection-id connection-id: Specifies the connection ID of the IKE SA to be cleared, in the range of
1 to 2000000000.
Usage guidelines
When you delete an IKE SA, the device automatically sends a notification to the peer.
Examples
# Display the current IKE SAs.
<Sysname> display ike sa
Connection-ID
----------------------------------------------------------
1
2
Flags:
RD--READY RL--REPLACED FD-FADING RK-REKEY
# Delete the IKE SA with the connection ID 2.
<Sysname> reset ike sa connection-id 2
# Display the current IKE SAs.
<Sysname> display ike sa
Connection-ID
----------------------------------------------------------
1
Flags:
RD--READY RL--REPLACED FD-FADING RK-REKEY

reset ike statistics

Use reset ike statistics command to clear IKE MIB statistics.
Syntax
reset ike statistics
Remote Flag
202.38.0.2 RD
202.38.0.3 RD
Remote Flag
202.38.0.2 RD
607
DOI
IPsec
IPsec
DOI
IPsec