Display Nhrp Statistics - H3C MSR Series Command Reference Manual

Field
Expiration time
Type
Flags

display nhrp statistics

Use display nhrp statistics to display NHRP packet statistics for a tunnel interface.
Syntax
display nhrp statistics [ interface tunnel interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command displays NHRP packet statistics for all
tunnel interfaces.
Examples
# Display NHRP packet statistics.
<Sysname> display nhrp statistics
Tunnel0:
NHRP packets sent
Resolution requests
Resolution replies
Registration requests : 0
Registration replies
Purge requests
Purge replies
Error indications
Description
Period of time in which the mapping entry will expire.
Mapping entry type:
•
•
•
Mapping entry flags:
•
•
•
•
•
: 815
: 15
: 1
: 797
: 2
: 0
: 0
1147
static—The entry is statically configured.
cached—The entry is dynamically obtained.
Incomplete—The entry is dynamic and
incomplete.
unique—The mapping entry in the registration
request cannot be overwritten by a mapping entry
that has the same protocol address and different
public addresses. A client can register the new
entry with the server only after the mapping entry
on the server expires.
used—This mapping entry is used for packet
forwarding.
up—Packets can be forwarded.
ipsec—IPsec negotiation succeeded. Packets will
be protected by IPsec.
init—Initialization state.