Connection Limit Commands; Connection-Limit - H3C MSR Series Command Reference Manual

Connection limit commands

IPv6-related parameters are not supported on the following routers:
•
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
•
MSR3600-28-SI/3600-51-SI.
Commands and descriptions for centralized devices apply to the following routers:
•
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
•
MSR2600-10-X1.
•
MSR 2630.
•
MSR3600-28/3600-51.
•
MSR3600-28-SI/3600-51-SI.
•
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.
•
MSR 3610/3620/3620-DP/3640/3660.
Commands and descriptions for distributed devices apply to the following routers:
•
MSR5620.
•
MSR 5660.
•
MSR 5680.

connection-limit

Use connection-limit to create a connection limit policy and enter its view, or enter the view of an
existing connection limit policy.
Use undo connection-limit to delete a connection limit policy.
Syntax
connection-limit { ipv6-policy | policy } policy-id
undo connection-limit { ipv6-policy | policy } policy-id
Default
No connection limit policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy: Specifies an IPv6 connection limit policy.
policy: Specifies an IPv4 connection limit policy.
policy-id: Specifies the ID of a connection limit policy. An IPv4 or IPv6 connection limit policy has its
own number. The value range for this argument is 1 to 32.
Examples
# Create IPv4 connection limit policy 1 and enter its view.
919