H3C MSR Series Command Reference Manual page 299

Comware 7 security
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Table 30 Command output
Field
Radio ID
SSID
Rule
Type
Action
Protocol
Status
Source
IP
Mask
Prefix length
Port
MAC
Interface
VLAN
Protocol
Destination
IP
Port
Mask
Prefix length
Author ACL
Pre-auth ACL
Number
Description
ID of the radio.
Service set identifier.
Number of the portal rule. IPv4 portal filtering rules and IPv6 portal filtering
rules are numbered separately.
Type of the portal rule:
Static—Static portal rule.
Dynamic—Dynamic portal rule.
Action triggered by the portal rule:
Permit—The interface allows packets to pass.
Redirect—The interface redirects packets.
Deny—The interface forbids packets to pass.
Match pre-auth ACL—The interface matches packets against the
authorized ACL rules in the preauthentication domain.
Transport layer protocol permitted by the portal-free rule:
Any—Permits any transport layer protocol.
TCP—Permits TCP.
UDP—Permits UDP.
Status of the portal rule:
Active—The portal rule is effective.
Unactuated—The portal rule is not activated.
Source information of the portal rule.
Source IP address.
Subnet mask of the source IPv4 address.
Prefix length of the source IPv6 address.
Source transport layer port number.
Source MAC address.
Layer 3 interface on which the portal rule is implemented.
Source VLAN ID.
Transport layer protocol of the portal redirect rule.
Destination information of the portal rule.
Destination IP address.
Destination transport layer port number.
Subnet mask of the destination IPv4 address.
Prefix length of the destination IPv6 address.
Authorized ACL assigned to authenticated portal users. This field is
displayed only for a dynamic portal rule.
Authorized ACL assigned to preauthentication portal users. This field is
displayed only for the Match pre-auth ACL action.
Number of the authorized ACL. This field displays N/A if the AAA server
does not assign an ACL.
276

Advertisement

Table of Contents
loading

Table of Contents