Display Attack-Defense Scan Attacker Ipv6 - H3C MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for MSR Series:
- Command reference manual (174 pages) ,
- Configuration manual (80 pages) ,
- Manual (33 pages)
Table of Contents
Advertisement
Table 158 Command output
Field
Totally 3 attackers
IP addr(DslitePeer)
VPN instance
Protocol
Detected on
Duration(min)
Related commands
display attack-defense scan victim ip
scan detect
display attack-defense scan attacker ipv6
Use display attack-defense scan attacker ipv6 to display information about IPv6 scanning
attackers.
Syntax
Centralized devices in standalone mode:
display attack-defense scan attacker ipv6 [ interface interface-type interface-number | local ]
[ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense scan attacker ipv6 [ [ interface interface-type interface-number | local ]
[ slot slot-number ] ] [ count ]
Distributed devices in IRF mode:
display attack-defense scan attacker ipv6 [ [ interface interface-type interface-number | local ]
[ chassis chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify
the device or a global interface, such as a VLAN interface or tunnel interface. If you do not specify a
card, this command displays information about IPv6 scanning attackers for all cards. (Distributed
devices in standalone mode.)
Description
Total number of IPv4 scanning attackers.
The IP addr field displays the IPv4 address of the attacker.
The DslitePeer field displays the DS-Lite tunnel source IPv6 address of
the attacker in a DS-Lite network. In other situations, this field displays
hyphens (--).
MPLS L3VPN instance to which the attacker's IPv4 address belongs. If the
IPv4 address is on the public network, this field displays hyphens (--).
Name of the protocol.
Where the attack is detected, on the device (Local) or an interface.
The amount of time the attack lasts, in minutes.
1007
Advertisement
Table of Contents
