Display Sslvpn Port-Forward Connection - H3C MSR Series Command Reference Manual

Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a policy group by its name, a case-insensitive string of 1 to 31 characters.
context context-name: Specifies an SSL VPN context by its name. An SSL VPN context name is a
case-insensitive string of 1 to 31 characters, and can contain only letters, digits, and underscores (_).
If you do not specify an SSL VPN context, this command displays information about policy groups
with the specified group name in all SSL VPN contexts.
Examples
# Display information about policy groups named pg1 in all SSL VPN contexts.
<Sysname> display sslvpn policy-group pg1
Group policy: pg1
Context: context1
Idle timeout: 35 min
Context: context2
Idle timeout: 40 min
Table 112 Command output
Field
Idle timeout

display sslvpn port-forward connection

Use display sslvpn port-forward connection to display TCP port forwarding connection
information.
Syntax
Centralized devices in standalone mode:
display sslvpn port-forward connection [ context context-name ]
Centralized devices in IRF mode:
display sslvpn port-forward connection [ context context-name ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
context context-name: Specifies an SSL VPN context by its name. An SSL VPN context name is a
case-insensitive string of 1 to 31 characters, and can contain only letters, digits, and underscores (_).
If you do not specify an SSL VPN context, this command displays TCP port forwarding connection
information for all SSL VPN contexts.
Description
Maximum idle time of an SSL VPN session, in minutes.
748