Apr Signature Auto-Update - H3C MSR Series Command Reference Manual

If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the maximum detected length to 100000 bytes for NBAR rule abcd.
<Sysname> system-view
[Sysname] nbar application abcd protocol http
[Sysname-nbar-application-abcd] apr set detectlen 100000
Related commands
nbar application

apr signature auto-update

Use apr signature auto-update to enable automatic update for the APR signature database and
enter auto-update configuration view.
Use undo apr signature auto-update to disable automatic update for the APR signature database.
Syntax
apr signature auto-update
undo apr signature auto-update
Default
Automatic update is disabled for the APR signature database.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM
-HK/810-W-LM-HK
MSR810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
Use this command to update the APR signature database if the device can access the signature
database services at the H3C website.
827
Command compatibility
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes