Whitelist Enable; Whitelist Global Enable - H3C MSR Series Command Reference Manual

[Sysname-attack-defense-policy-atk-policy-1] rst-flood threshold 100
Related commands
udp-flood action
udp-flood detect
udp-flood detect non-specific

whitelist enable

Use whitelist enable to enable the whitelist feature on an interface.
Use undo whitelist enable to disable the whitelist feature on an interface.
Syntax
whitelist enable
undo whitelist enable
Default
The whitelist feature is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
If the global whitelist feature is enabled, the whitelist feature is enabled on all interfaces. If the global
whitelist feature is disabled, you can use this command to enable the whitelist feature on individual
interfaces.
Examples
# Enable the whitelist feature on interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] whitelist enable

whitelist global enable

Use whitelist global enable to enable the global whitelist feature.
Use undo whitelist global enable to disable the global whitelist feature.
Syntax
whitelist global enable
undo whitelist global enable
Default
The global whitelist feature is disabled.
Views
System view
1091