H3C MSR Series Command Reference Manual page 853

Syntax
apr signature update [ override-current ] file-path
Views
System view
Predefined user roles
network-admin
Parameters
override-current: Overwrites the old APR signature file. If you do not specify this keyword, the old
APR signature file will be saved as a backup signature file on the device after the update.
file-path: Specifies the path of the new APR signature file, a case-insensitive string of 1 to 256
characters.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM
-HK/810-W-LM-HK
MSR810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
Use this command to update APR signature database if the device cannot access the signature
database services at the H3C website.
You can use either of the following methods to manually update the APR signature database:
•
Local update—By using the locally stored APR signature file.
(Centralized devices in IRF mode.) The APR signature file must be stored on the mater device
for a successful update.
(Distributed devices in standalone mode.) To ensure a successful update, the APR signature
file must be stored on the active MPU.
(Distributed devices in IRF mode.) To ensure a successful update, the APR signature file must
be stored on the global active MPU.
The following table describes the formats of the file-path argument for different update
scenarios:
Update scenario
The update file is stored in the
current working directory.
Format of file-path
filename
830
Command compatibility
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Remarks
To display the current working directory,
use the pwd command (see file system
management in Fundamentals
Command Reference).