Parameters
time-value: Specifies the silence period in seconds during which the port remains disabled. The
value is in the range of 20 to 300.
Usage guidelines
If you configure the intrusion protection action as disabling the port temporarily, use this command to
set the silence period.
Examples
# Configure the intrusion protection action on GigabitEthernet 1/0/1 as disabling the port temporarily,
and set the port silence period to 30 seconds.
<Sysname> system-view
[Sysname] port-security timer disableport 30
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port-security intrusion-mode disableport-temporarily
Related commands
display port-security
port-security intrusion-mode
snmp-agent trap enable port-security
Use snmp-agent trap enable port-security to enable SNMP notifications for port security.
Use undo snmp-agent trap enable port-security to disable SNMP notifications for port security.
Syntax
snmp-agent trap enable port-security [ address-learned | dot1x-failure | dot1x-logoff |
dot1x-logon | intrusion | mac-auth-failure | mac-auth-logoff | mac-auth-logon ] *
undo snmp-agent trap enable port-security [ address-learned | dot1x-failure | dot1x-logoff |
dot1x-logon | intrusion | mac-auth-failure | mac-auth-logoff | mac-auth-logon ] *
Default
All port security SNMP notifications are disabled.
Views
System view
Predefined user roles
network-admin
network-operator
Parameters
address-learned: Specifies notifications about MAC address learning.
dot1x-failure: Specifies notifications about 802.1X authentication failures.
dot1x-logoff: Specifies notifications about 802.1X user logoffs.
dot1x-logon: Specifies notifications about 802.1X authentication successes.
intrusion: Specifies notifications about illegal frame detection.
mac-auth-failure: Specifies notifications about MAC authentication failures.
mac-auth-logoff: Specifies notifications about MAC authentication user logoffs.
mac-auth-logon: Specifies notifications about MAC authentication successes.
228