Limit - H3C MSR Series Command Reference Manual

Comware 7 security
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Field
VPN instance
DS-Lite tunnel peer
Service
Sessions threshold
Hi/Lo
Sessions count
Sessions limit rate
New session flag
Related commands
connection-limit apply global policy
connection-limit apply policy
connection-limit policy

limit

limit
Use limit to configure a connection limit rule.
Use undo limit to remove the specified connection limit rule.
Syntax
In IPv4 connection limit policy view:
limit limit-id acl [ ipv6 ] { acl-number | name acl-name } [ per-destination | per-service |
per-source ] * { amount max-amount min-amount | rate rate } * [ description text ]
limit limit-id acl ipv6 { acl-number | name acl-name } per-dslite-b4 { amount max-amount
min-amount | rate rate } * [ description text ]
undo limit limit-id
In IPv6 connection limit policy view:
limit limit-id acl ipv6 { acl-number | name acl-name } [ per-destination | per-service | per-source ]
* { amount max-amount min-amount | rate rate } * [ description text ]
undo limit limit-id
Default
No connection limit rules exist.
Description
MPLS L3VPN instance to which the IP address belongs. Two hyphens (--)
indicates that the IP address is on the public network.
Peer IP address of the DS-Lite tunnel. Two hyphens (--) indicates that the
connection does not belong to a DS-Lite tunnel.
Protocol name and service port number.
For an unwell-known protocol, this field displays unknown(xx). The cross signs
(xx) represents the protocol number. For the ICMP protocol, the protocol number
is the decimal digits that are converted from the hexadecimal contents of the type
and code fields.
Upper and lower connection limits.
Number of current connections.
Maximum number of connections established per second.
Whether or not new connections can be created:
Permit—New connections can be created.
Deny—New connections cannot be created.
NOTE:
When the number of connections reaches the upper limit, this field displays
Permit although new connections are not allowed. This field displays Deny only
when the number of connections exceeds the upper limit.
935

Advertisement

Table of Contents
loading

Table of Contents