H3C MSR Series Command Reference Manual page 959
Comware 7 security
Hide thumbs
Also See for MSR Series:
- Command reference manual (174 pages) ,
- Configuration manual (80 pages) ,
- Manual (33 pages)
Table of Contents
Advertisement
Views
IPv4 connection limit policy view
IPv6 connection limit policy view
Predefined user roles
network-admin
Parameters
limit-id: Specifies a connection limit rule by its ID. The value range for this argument is 1 to 256.
acl: Specifies the ACL that matches the user range. Only the user connections that match the ACL
are limited.
ipv6: Specifies an IPv6 ACL. If you do not specify this keyword, an IPv4 ACL is used.
acl-number: Specifies an ACL by its number in the range of 2000 to 3999.
name acl-name: Specifies an ACL by its name. The acl-name argument is a case-insensitive string
of 1 to 63 characters. It must start with an English letter. To avoid confusion, make sure it is not all.
per-destination: Limits connections by destination IP address.
per-service: Limits connections by service depending on transport layer protocol and service port.
per-source: Limits connections by source IP address.
per-dslite-b4: Limits connections by IPv6 address of a B4 device on a DS-Lite tunnel. This keyword
is available only in IPv4 connection limit policy view. The following matrix shows the per-dslite-b4
keyword and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/
810-LM-HK/810-W-LM-HK
MSR810-LMS/MSR810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
amount: Limits the number of connections.
max-amount: Specifies the upper connection limit in the range of 1 to 4294967294. When user
connections in a range or of a type exceed the upper connection limit, new connections cannot be
created. As a best practice, set the upper connection limit to a value greater than 32 to make sure the
device can function correctly.
min-amount: Specifies the lower connection limit in the range of 1 to 4294967294. The lower
connection limit cannot be greater than the upper connection limit. New connections cannot be
created until the connection number goes below the lower connection limit.
rate: Limits the connection establishment rate.
rate: Specifies the maximum number of connections established per second. The value range is 5 to
10000000.
Keyword compatibility
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
936
Advertisement
Table of Contents
