Display Ssh Client Source; Exit - H3C MSR Series Command Reference Manual
Comware 7 security
Hide thumbs
Also See for MSR Series:
- Command reference manual (174 pages) ,
- Configuration manual (80 pages) ,
- Manual (33 pages)
Table of Contents
Advertisement
Predefined user roles
network-admin
network-operator
Examples
# Display the source IP address configured for the SFTP client.
<Sysname> display sftp client source
The source IP address of the SFTP client is 192.168.0.1
The source IPv6 address of the SFTP client is 2:2::2:2.
Related commands
sftp client ipv6 source
sftp client source
display ssh client source
Use display ssh client source to display the source IP address configured for the Stelnet client.
Syntax
display ssh client source
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the source IP address configured for the Stelnet client.
<Sysname> display ssh client source
The source IP address of the SSH client is 192.168.0.1
The source IPv6 address of the SSH client is 2:2::2:2.
Related commands
ssh client ipv6 source
ssh client source
exit
Use exit to terminate the SFTP connection and return to user view.
Syntax
exit
Views
SFTP client view
Predefined user roles
network-admin
695
Advertisement
Table of Contents
