Display Object-Policy Ipv6 - H3C MSR Series Command Reference Manual

Field
Object-policy accelerated
rule 5 pass source-ip sourceip
rule 5 comment This rule is used for
source-ip sourceip

display object-policy ipv6

Use display object-policy ipv6 to display information about IPv6 object policies.
Syntax
display object-policy ipv6 [ object-policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
object-policy-name: Specifies an object policy by its name, a case-insensitive string of 1 to 63
characters. If you do not specify an object policy name, this command displays information about all
IPv6 object policies.
Usage guidelines
This command displays IPv6 object policy rules in the order they were configured.
Examples
# Display information about all IPv6 object policies.
<Sysname> display object-policy ipv6
Object-policy ipv6 pass
This is an IPv6 object policy for the zone-pair security source office destination library
Object-policy accelerated
rule 5 pass source-ip sourceipv6
rule 5 comment This rule is used for source-ip sourceipv6
Table 149 Command output
Field
Object-policy ipv6 pass
This is an IPv6 object policy for the
zone-pair security source office destination
library
Object-policy accelerated
rule 5 pass source-ip sourceipv6
Description
Rule matching acceleration is enabled for the IPv4 object
policy.
Statement of rule 5. The value of sourceip is the name of the
source IPv4 address object group.
Description of rule 5.
Description
Name of the IPv6 object policy.
Description of the IPv6 object policy.
Rule matching acceleration is enabled for the IPv6 object
policy.
Statement of rule 5. The value of sourceipv6 is the name of
the source IPv6 address object group.
957